Step 1:	click on thumbnails for larger view. Click the back button in your browser to return to this page.
Arrange the pieces...
Step 2:
Carefully uncoil the copper tubing. Make sure it fits properly in your boiling pot.
Step 3:
Have the ends of the coil come up outside of the pot.
Step 4:
Snip the clear plastic tubing into two equal lengths and attach to the ends of the coil with two hose clamps each.
Step 5:
One of these will be the intake, and one the exhaust
Step 6:
Attach the barb into the intake (your choice at this point) end of business. Clamp it off as well.
Step 7:
On the other end of the barb, clamp on the 1/2" Inner Diameter tubing that will attach to the faucet adapter.
Step 8:
That's it! All you need to do now is clamp the last intake to the faucet adapter!